Hello RBWers, I've been having problems with a set of older type RBW Silver bar end shifters. There seems to be a lot of play in the shifters. They've been like this out of the box. They also slip a bit in the middle sprockets, ghost shifting from the bigger to smaller sprocket. Tightening the bolt that holds the shifter lever doesn't make much difference, even with the bolt done up pretty tight the play and slipping seem to persist.
It seems this is a bit of a known problem with these shifters. Does anyone have any suggestions for a remedy for this? E.g. is it possible to add an additional washer somewhere? Thanks for any help, Johnny in Belgium -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/da880c83-8b08-4b1e-a60e-95a1a88fd0ban%40googlegroups.com.