One of my big regrets of my Clem is not paying Riv the $40 or $50 they wanted to install the fenders. Instead, they just arrived in the box. After a particularly cold rainy ride a couple of years ago, I finally installed them.
Now it seems I cannot adjust out the tendency of the chain to rub the fender. They've always rubbed when I use the 34 in the back and the next lowest gear as well. After the bike's only trip ever to the shop this month to diagnose a dragging freehub which has since been replaced, the chain is rubbing worse than ever in the lower gears, and the front small ring is about impossible. I'm feeling like I want to take my Dremel to the fender and trim back a quarter inch or so. How does Riv install these fenders? Surely they don't send them out with this kind of interference. signed, Noisy Clem Owner -- ------------------------------------------------------------------ signature goes here -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CA%2BypmEb9V6a6kQtzypL7-rKKiviqJ6D5JFVj%3D5F2KiGFCHBJug%40mail.gmail.com.