Thanks, Eric. I'm thinking of converting at least two bikes to dyno powered tail lamps and any wiring info is useful.
'Nother question: can you use the E3 tail light with, say an Edeluxe or Cyo? On Wed, Sep 7, 2011 at 6:43 PM, EricP <ericpl...@aol.com> wrote: > Patrick, > > On the bike with the rear wired tail light, just ran the wire across > the rack held down with zip ties, then a few wraps around one of the > rack stays, along the top tube (again held with zip ties), to the > brake cable housing, then down parallel to the bike computer wire to > the light. At that point, the wires were soldered together and > covered in shrink wrap. > > Very basic, but should keep the tail light wires away from sludge and > crud in winter. It's a non-Rivendell (Surly LHT) with Tubus rear rack > and the B&M Toplight Line Plus bolted to the rear rack. > > Have not come up with a satisfactory wiring system for the E3 and > corresponding tail light on the Sam Hillborne. The previous wiring > actually caused the headlight to fail. Admit to a bit of fear of > trying it again. Additionally, don't like the Supernova tail light as > I prefer something with a reflector. But no other tail light is > compatible with the E3. > > Eric Platt > St. Paul, MN > > > On Sep 7, 11:31 am, PATRICK MOORE <bertin...@gmail.com> wrote: >> Eric: will you share with us your rear light wiring strategy? Thanks. >> > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW http://resumespecialties.com/index.html -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
