That's an idea. I may actually build a small custom tank and make it RC just to get the hang of it.
Thanks for the advice! On Sun, Dec 21, 2008 at 10:17 PM, jvragu47 <jpl...@yahoo.com> wrote: > > Always a good idea to rough put the design in cardboard. Makes it much > easier to see the constraints placed on location of the internals. > > > > On Dec 21, 10:47 am, Phil <sasquevane...@aol.com> wrote: > > I'd just add that before worrying too much about scale plans you > > should think about motors, gears, markers and electrics. You don't > > want to build a perfect scale hull then find it's 1/16th inch too > > narrow for your motors. It can also affect your choice of model as if > > you're using wood or metal sheets then you might want one of the > > welded hulls whereas if you are molding then the cast versions would > > make more sense. > > > > Phil Palmer > > On Dec 21, 5:44 am, jvragu47 <jpl...@yahoo.com> wrote: > > > > > > > > > Mike, > > > I have a sheet , 1/35 scale ,of the model that you're want to > > > build. Ican make you a copy and mail it to you. Let me know. > > > > > John > > > > > Dec 18, 5:45 pm, mike <mike082...@gmail.com> wrote: > > > > > > Fellow hobbyiststs, > > > > > > You probably forgot (like me) that I was going to build an M4 > Sherman. > > > > The problem is its lack of information. Can somebody share a way to > > > > acquire some reasonable blueprints? The model is specifically the > M4A3 > > > > 76mm (Wet) Sherman VVSS similar to the HVSS E8 I believe.- Hide > quoted text - > > > > > - Show quoted text -- Hide quoted text - > > > > - Show quoted text - > > > -- -Mike Måne @ http://moonrcprojects.googlepages.com --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---