Oh I know you weren't asking about metal, but anyone considering casting out of metal should also note that cast metal tends to shrink once it's cooled. From what I heard, your mold should be about 10% over sized to take the shrinkage under account. I'm sure the 10% number also depends on the type of metal being cast.
Derek (no shrinkage jokes please ;) ) On Tue, Feb 17, 2009 at 5:59 PM, Derek Engelhaupt <tan...@gmail.com> wrote: > I just worry about the hardness of the Shapelock for track pads. I > know some of the other plastic resins used by folks can be quite hard. > Not knowing what the hardness is before using it would be a gamble > IMO. Nothing like casting a whole lot of track pads to find out they > wear out after a short period of time. > > Derek > > On Tue, Feb 17, 2009 at 5:31 PM, George MacGillis <tinsmi...@gmail.com> wrote: >> http://www.shapelock.com/index.html This stuff look like it would work just >> fin. >> >> On Tue, Feb 17, 2009 at 3:27 PM, Andy Schwartz <andyman61...@yahoo.com> >> wrote: >>> >>> I am asking about resin not metal material. >>> >>> Andy >>> ----- Original Message ----- >>> From: "Retired Rider" <tinsmi...@gmail.com> >>> To: "R/C Tank Combat" <rctankcombat@googlegroups.com> >>> Sent: Tuesday, February 17, 2009 6:19 PM >>> Subject: [TANKS] Re: Casting treads question >>> >>> >>> >>> I would also like to know about the mold your going to use for the >>> treads, I cast items using Lead Free Pewter. And I mix in pure tin to >>> make it a bit harder. Only problem I have is not being able to make >>> the mold, maainly because I don't know how! The Tin will be harder >>> then the zinc and will hold up better. >>> >>> George >>> >>> On Feb 17, 1:49 pm, "Paul Hilton" <phil...@defnet.com> wrote: >>> > I'm going to try tin alloy. Perhaps later I'll give zinc a try. >>> > >>> > Paul H. >>> > >>> > >>> > >>> > ----- Original Message ----- >>> > From: AES >>> > To: rctankcombat@googlegroups.com >>> > Sent: Tuesday, February 17, 2009 4:37 PM >>> > Subject: [TANKS] Casting treads question >>> > >>> > What is the recomended material to cast treads from? >>> > >>> > Thanks >>> > >>> > Andy--- Hide quoted text - >>> > >>> > - Show quoted text - >>> >>> >>> PATRIOT GUARD RIDERS #106442 >>> 08' Harley Ultra Classic >>> >>> >>> >> > --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---