Yes, but the great thing about those multi-turn servos is that they provide position feedback. I was planning to try one as a turret rotator using a light weight timing belt configuration to gear it down by about 3:1. I want to make sure there's some slip in case somebody (Steve !) rams my marker barrel.
- Doug -----Original Message----- From: rctankcombat@googlegroups.com [mailto:rctankcom...@googlegroups.com] On Behalf Of Frank Pittelli Sent: Sunday, February 22, 2009 6:34 PM To: rctankcombat@googlegroups.com Subject: [TANKS] Re: drum servos Joker wrote: > Analog servos can be 'hacked' to remove the stops. You basically need > to remove the pot from the servo, and you get a gear motor that does > free rotation in either direction, and its still has its 'speed > control' so you can go slow or fast. Hmmm ... last time I checked, that's exactly what a geared motor will do. Throw two inexpensive switches on a servo (aka. MAG Speed Control) and wire them to an inexpensive geared motor and you have a far more powerful solution. Frank P. --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---