Derek, Will you send us the overall budget save the electronics, and teh weight 
of teh vehicle without batteries?  If I had seen your M113, I would have built 
an exact copy of this one, using the same materials. Great model for beginners 
or for those who want a quick project!
Chrys

  ----- Original Message ----- 
  From: Derek Engelhaupt 
  To: [email protected] 
  Sent: Sunday, August 09, 2009 7:07 PM
  Subject: [TANKS] Re: New supply vehicle on the horizon


  It's 40 pitch "table top" chain.  The pads are acetal plastic.  That kind of 
chain is on Ebay 
  all the time.  The drive sprocket is 21 tooth if I remember correctly.  The 
motors are similar 
  to the M-01 motors, but without a base and they are 450W each and running at 
about 450 
  RPMs at 24V.  I'm using the stock 42 pitch 9 tooth sprocket on the motor 
mated to a 40 pitch  9 
  tooth sprocket on the drive shaft all driven by 41 pitch chain.  The motors 
can be adjusted 
  front to rear to keep the drive chains tightened.  The outside of the motor 
mount slides into 
  a triangle piece of wood at the front of the hull.  The triange is glued and 
screwed to the front
  angle of the hull and to the track sponsons.  That keeps the front of the 
mount in place.  The
  rear of the mount uses two pieces of wood screwed together in an "L" to allow 
for space for 
  the mount to slide to the rear and it also keeps the rear of the mount from 
moving.  That is 
  screwed and glued to the upper hull sides.  The motors can be removed by 
removing 4 screws.  
  Just to ensue there was no movement of the mounts, I put the top brace on 
across the two 
  mounts.  Basically the systems (suspension, motor mounts, suspension arms, 
etc.) are all 
  varients of the designs I used in the Sturmtiger.  All of the mount pieces 
are made from either 
  solid wood or 1" plywood I had in the garage.  The lower hull pieces are all 
1/2" ply except the 
  lower front slope, that is aluminum plate and can be removed to get to the 
drive shafts for maintenance.
  I've put power to both tracks and everything seems to be aligned well.  Now 
time will tell if the tracks
  will stay on, but I have a few tricks I can try if they have some issues with 
that.

  Derek
  T065


  On Sun, Aug 9, 2009 at 8:15 AM, Modena <[email protected]> wrote:


    nice work Derek, looking good. at 1/6 it should be about 75cm long,
    that looks like about a 22 tooth sprocket on the front, what pitch is
    the chain? The gearing looks pretty fast.....

    :)

    Ben

    On Aug 9, 5:29 pm, "Chrysanthos Kanellopoulos" <[email protected]>
    wrote:

    > Very clean and straighforward construction. Textbook case. Are these 
motors 24 V?  It is going to fly with those!  I like the way they are 
accommodated in the front of the hull.  And I had thought it would be easy to 
build a quick M113. It looks easy now, after Derek built one.
    > Chrys
    >
    >
    >
    >   ----- Original Message -----
    >   From: Derek Engelhaupt
    >   To: [email protected]
    >   Sent: Sunday, August 09, 2009 8:50 AM
    >   Subject: [TANKS] Re: New supply vehicle on the horizon
    >
    >   Just a quick update on progress.  As of today, the suspension is in, 
tracks are mounted,
    >   and motors mounted.  Tomorrow....the electronics go in and hopefully a 
first test drive.  
    >   One of the local MP's is doing the final motor mount and track tension 
inspections.  :)
    >

    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000001...
    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000002...
    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000003...
    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000004...
    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000005...
    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000006...
    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/IM000007...

    >  http://i154.photobucket.com/albums/s265/nitzerebbhead/M113A3/backpic.jpg
    >
    >   Derek
    >   T065




  


--~--~---------~--~----~------------~-------~--~----~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
-~----------~----~----~----~------~----~------~--~---

Reply via email to