<https://lh3.googleusercontent.com/-sLXhI12yFXs/Vln-DHBeZVI/AAAAAAAADCg/QM53Kwea_-4/s1600/51AMU0aK4gL._SX342_.jpg>
<https://lh3.googleusercontent.com/-5xhZXCsRYpE/Vln9_swKhWI/AAAAAAAADCY/7jy_V4DiBvI/s1600/11u_052-500x500.JPG> On Saturday, November 28, 2015 at 11:10:49 AM UTC-8, Robert Currie wrote: > > Get yourself a good 4 1/2" or 5" hand grinder ,good eye protection "full > face is great! , and some zip blade disks for what ever metal you are using > they have them for aluminum and steel > when you scribe a line on your material ...go over it slow and steady with > the zip blade and have a firm grip on your grinder start a grove in the > material and go over it until you are through > great for straight cuts ,use a drill to help in inside corners, save the > disks when they are small they are great for cutting curves > > > <https://lh3.googleusercontent.com/-semFTS4yXI8/Vln68zChCCI/AAAAAAAADCE/q61DiZSf5Ak/s1600/IMG_0402.jpg> > > <https://lh3.googleusercontent.com/-FxD5EXRTwLs/Vln7gfUZlaI/AAAAAAAADCM/nw_N7YTtLu8/s1600/IMG_0396.jpg> > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.