We are very impressed with the Quick Mount flashed brackets......they are a solid attachment with no chance at leakage if installed properly. Easy to install, small number of tools required, and good quality. Oregon rebate programs (where we are based) are requiring all roof penetrations/attachments to be flashed. even though it is a bit more expensive, the flashed penetrations allow us to sleep well at night. we have never had a call back due to a leak with a caulk and L foot attachment, but i would expect them to fail before the flashed attachments, and in the ~30 year life expectancy of the solar modules and possibly roof, I dont have that much confidence in caulking lasting that long, even though caulking hasn't failed in 10 years, I find it hard to believe that it will last 3 times that long.....i like the idea of all components having a similar life expectancy.
Sunny Regards, Kirpal Khalsa NABCEP Certified Solar PV Installer Renewable Energy Systems www.oregonsolarworks.com 541-218-0201 m 541-592-3958 o On Thu, Jun 24, 2010 at 9:18 AM, Peter Parrish < peter.parr...@calsolareng.com> wrote: > IMHO the TileTrack system for flat concrete tile or S-tile is the best > approach there is. The 3/8” SS all thread can be accommodated by a ~3/8” > hole in the tile, leaving an exceedingly narrow gap around the all-thread to > caulk. > > > > By way of distinction, I never use tile track on comp-shingle or torchdown > roofs, using instead Fast-Jacks and Oatey elastomeric flashing. > > > > - Peter > > > > > > Peter T. Parrish, Ph.D., President > California Solar Engineering, Inc. > 820 Cynthia Ave., Los Angeles, CA 90065 > CA Lic. 854779, NABCEP Cert. 031806-26 > peter.parr...@calsolareng.com > Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885 > > > > > ------------------------------ > > *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: > re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Nick Soleil > *Sent:* Wednesday, June 23, 2010 5:10 PM > *To:* RE-wrenches > *Subject:* Re: [RE-wrenches] Flashed Footing Requirements > > > > Who can help: > One of our local jurisdictions, City of Petaluma, is beginning to > require flashed footings under all solar arrays. I think that some flashed > footings are better than the Unirac L feet or Prosolar's TileTrac foot, > but the flashed footings cost a lot more $, and some flashed footing > products seem flawed (less watertight) They are asking me to uninstall two > commissioned systems from last week, and replace the footings with flashed > Fast Jacks, even though the documents detailed the penetration method. > > I am looking for some good info that supports flexible installation > methods, including caulked footings. Our industry has come a long way from > the early days of racking on slotted angle iron with steel L-brackets for > feet, but those experiences tend to give me confidence in continuing to use > caulked footings. > > Nick Soleil > Project Manager > Advanced Alternative Energy Solutions, LLC > PO Box 657 > Petaluma, CA 94953 > Cell: 707-321-2937 > Office: 707-789-9537 > Fax: 707-769-9037 > > > > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > --
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org