Jay:
Bad idea. The differences in tolerances within components will make one
work harder than the other. They will never balance. Why not put the
charge controllers at the other end of the feeder?
William Miller
At 08:06 AM 10/20/2010, you wrote:
HI All,
Say anyone ever paralleled mx/fm-60's?
I have a unique situation that would be very expensive to pull additional
wire however the existing wire is large enough to need 2 fm-60s'
If I put a diode between them so they don't feed each other any problems
that anyone knows of?
thanks,
jay
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
