Tom, It can be done, depending upon how deep the static water level is and what additional lift or pressurization needs to be overcome.
The SQ-Flex will run at highest capacity off an AC source, so I'd consider using an inverter system and grid power, with additional solar designed to supplement the grid. You can run the SQ-Flex off a 120v source, so a single inverter works fine. I run my Flex off my FX2024 along with all my regular household loads, no problems. Size the array to cover the load through the longest expected grid outage (minimum) or you can size the solar to provide the majority of the power, and use the grid as "bonus" energy or to cover up for sizing shortages or the inevitable load creep. Phil Undercuffler "imagine if..." On Thu, Feb 10, 2011 at 5:29 AM, Tom DeBates <habite...@yahoo.com> wrote: > hello Wrenches, > I have an organization in Haiti that I have assisted with PV projects in > the past. They drill public wells and have a well (4" casing) that they > would like to pump with PV. Problem (one) is that well will draw at ~ 20 gpm > and they want ~ 25,000 gpd from the well. I have tried to look at every > option I can and it looks like a battery bank will be necessary and an > inverter ( 48 volt battery bank) to pump at the rate required. OOPPs, forgot > they want to use a Grundfos SQ Flex pump, 16-SQF-10. The gird is > "present".....very erratic and stressed, of course. They really would not > like to stress gird further and do not want to add a generator. Yep, they > made this easy. There are more details, but has anyone designed a PV water > pumping system under these constraints and, if so, what have been your > results? > thanks, > tom > > Tom DeBates > Habi-Tek > 524 Summit St. > Geneva,IL. 60134 > 630-262-8193 > fax 630-262-1343 > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org