Panels in landscape mode with rails running peak to gutter? On Apr 29, 2016 6:54 AM, "frenergy" <frene...@psln.com> wrote:
> Recently, a customer had a metal roof (not standing seam) installed by a > "handyman". Pretty clean installation however for some reason he ran 1X6 > stringers across the roof on the 1/2" plywood deck spaced about every 4 > feet (as you go from ridge to eaves). Of course the roofing screws are at > the stringers. I'm sure he had a *great* reason for doing so. So now I > have been asked to install an array on this roof. You can feel how "soft" > the roof is as you walk on it of course because you are walking on > air-below-metal for most of the roof. Stringer locations don't jive with > possible feet/post locations for rail. I'm usually pretty good at problem > solving but I'm accepting ideas. > > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St. > Taylorsville, CA 95983530.284.7849 > CA Lic 874049www.frenergy.net > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org