We have had to install blocking between TJI beams and anchor to them.Piercing
the top member was a no-no.
GlennSent from my 'smart' phone so please excuse spelling and typographical
errors.
------ Original message------From: frenergyDate: Fri, Mar 2, 2018 9:18 PMTo:
re-wrenches@lists.re-wrenches.org;Cc: Subject:Re: [RE-wrenches] TJI rafters
Jerry,
Metal roof? comp? tile?
Bill
On 3/2/2018 1:23 PM, Jerry Caldwell
wrote:
Dear Wrenches,
I have a customer with a low slope roof supported by TJI
beams. Does anyone have experience permitting and installing
on TJIs? I'm curious if jurisdictions are requiring Structural
Engineer stamps.
Since the top chord of the beams is only 1 3/8" thick
should we be using shorter lag bolts for these installations?
It also seems that it would be undesirable to penetrate into
the web of the beam.
Any advice would be appreciated here.
Thank you,
Jerry Caldwell
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
--
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
Virus-free. www.avast.com
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
