Hi all i have great respect for Magnum, it seems to have greater surge capacity, and i have 120 volt draws greater thsn 2500 watts on one leg. I never had a to much load one one leg problem. With Magnum, so please give more information
On Thu, May 31, 2018, 7:09 AM Drake <drake.chamber...@redwoodalliance.org> wrote: > That is interesting about Magnum: Tech support > told me that the 4024PAE was two separate 2000 W > inverters. We had problems with a microwave shutting the system down. > > Do you find you have good reliability with Magnum products? > > Drake > > > At 03:53 PM 5/30/2018, you wrote: > >HI Dave and everyone, Its interesting because > >there is a great deal of difference between > >OEM’s. Outback says 4kw at 120v for 8kw > >radian. ( tech support) Magnum says 27 amps at > >120v, 16.7 amps at 240 for MS4024PAE ( from the > >manual) Schneider says 4200 watts at 120v on > >XW-6848 ( from the manual) Also I know that the > >Magnum allows you to charge with just 120v and I > >think the XW is the same, OB you have to have > >240v. Cheers jay > On May 30, 2018, at 7:52 AM, > >Dave Angelini Offgrid Solar > ><offgridso...@sti.net> wrote: > > The 8kw radian > >still has to have balance! You can't expect it > >to supply > 8kw @ 120vac. It can supply 8kw @ > >240 vac. > > >> Does each of the 4 kW 240 volt > >inverters have a maximum on the 120-volt >> > >power it can supply? for example, can it supply > >70% of the 4 kW on 120 >> -volts? >> This > >example would leave 5.6 kW of 120-volt? >> >> On > >Tue, May 29, 2018 at 11:09 PM, jerrysgarage01 >> > ><jerrysgarag...@gmail.com> >> wrote: >> >>> The > >Radian has 2, 4k, 240 volt inverters, so its > >different but the way >>> the >>> computer works > >it makes the same from the load side of > >things >>> Jerry >>> >>> >>> >>> Sent from my > >Verizon, Samsung Galaxy smartphone >>> >>> >>> > >-------- Original message -------- >>> From: > >frenergy <frene...@psln.com> >>> Date: 5/29/18 > >5:51 PM (GMT-10:00) >>> To: > >re-wrenches@lists.re-wrenches.org >>> Subject: > >[RE-wrenches] Xfmr's job? >>> >>> Hey > >folks, >>> >>> Outback FP2 with Xfrmr > >shifts power to "other" leg if that >>> leg > >needs more than the one FX can provide, > >right? Say, you need 5.5 KW >>> on leg 1, the > >Xfrmr pulls some power from the leg 2 (inverter) > >to >>> support that 5.5KW load on leg 1. >>> >>> > >My question (assuming above is accurate) is does > >the 8048 Radian do the >>> same? >>> >>> > >Thanks, >>> >>> Bill >>> >>> Feather River Solar > >Electric >>> Bill Battagin, Owner >>> 4291 > >Nelson St. >>> Taylorsville, CA 95983 >>> > >530.284.7849 >>> CA Lic 874049 >>> > >www.frenergy.net >>> >>> >>> --- > >_______________________________________________ > >List sponsored by Redwood Alliance List Address: > >RE-wrenches@lists.re-wrenches.org Change > >listserver email address & settings: > >http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > >List-Archive: > > > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > >List rules & etiquette: > >www.re-wrenches.org/etiquette.htm Check out or > >update participant bios: www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org