Magnum is a no go for me for several reasons. First one is until they have a decent web based system data view/configure I can't help my remote clients as I do with Outback and Schneider.
The second is they did not have a charge controller until 3 or so years ago:( The 8 KW radian and its mppts or an XW+ and the hi voltage mppt just works too well. XW+ can be configured for 6.8 KW @ 120vac if needed. I am going to use alot of skyboxes if they release it in November! Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 > Hi all i have great respect for Magnum, it seems to have greater surge > capacity, and i have 120 volt draws greater thsn 2500 watts on one leg. I > never had a to much load one one leg problem. With Magnum, so please give > more information > > On Thu, May 31, 2018, 7:09 AM Drake <drake.chamber...@redwoodalliance.org> > wrote: > >> That is interesting about Magnum: Tech support >> told me that the 4024PAE was two separate 2000 W >> inverters. We had problems with a microwave shutting the system down. >> >> Do you find you have good reliability with Magnum products? >> >> Drake >> >> >> At 03:53 PM 5/30/2018, you wrote: >> >HI Dave and everyone, Its interesting because >> >there is a great deal of difference between >> >OEMââ¬â¢s. Outback says 4kw at 120v for 8kw >> >radian. ( tech support) Magnum says 27 amps at >> >120v, 16.7 amps at 240 for MS4024PAE ( from the >> >manual) Schneider says 4200 watts at 120v on >> >XW-6848 ( from the manual) Also I know that the >> >Magnum allows you to charge with just 120v and I >> >think the XW is the same, OB you have to have >> >240v. Cheers jay > On May 30, 2018, at 7:52 AM, >> >Dave Angelini Offgrid Solar >> ><offgridso...@sti.net> wrote: > > The 8kw radian >> >still has to have balance! You can't expect it >> >to supply > 8kw @ 120vac. It can supply 8kw @ >> >240 vac. > > >> Does each of the 4 kW 240 volt >> >inverters have a maximum on the 120-volt >> >> >power it can supply? for example, can it supply >> >70% of the 4 kW on 120 >> -volts? >> This >> >example would leave 5.6 kW of 120-volt? >> >> On >> >Tue, May 29, 2018 at 11:09 PM, jerrysgarage01 >> >> ><jerrysgarag...@gmail.com> >> wrote: >> >>> The >> >Radian has 2, 4k, 240 volt inverters, so its >> >different but the way >>> the >>> computer works >> >it makes the same from the load side of >> >things >>> Jerry >>> >>> >>> >>> Sent from my >> >Verizon, Samsung Galaxy smartphone >>> >>> >>> >> >-------- Original message -------- >>> From: >> >frenergy <frene...@psln.com> >>> Date: 5/29/18 >> >5:51 PM (GMT-10:00) >>> To: >> >re-wrenches@lists.re-wrenches.org >>> Subject: >> >[RE-wrenches] Xfmr's job? >>> >>> Hey >> >folks, >>> >>> Outback FP2 with Xfrmr >> >shifts power to "other" leg if that >>> leg >> >needs more than the one FX can provide, >> >right? Say, you need 5.5 KW >>> on leg 1, the >> >Xfrmr pulls some power from the leg 2 (inverter) >> >to >>> support that 5.5KW load on leg 1. >>> >>> >> >My question (assuming above is accurate) is does >> >the 8048 Radian do the >>> same? >>> >>> >> >Thanks, >>> >>> Bill >>> >>> Feather River Solar >> >Electric >>> Bill Battagin, Owner >>> 4291 >> >Nelson St. >>> Taylorsville, CA 95983 >>> >> >530.284.7849 >>> CA Lic 874049 >>> >> >www.frenergy.net >>> >>> >>> --- >> >_______________________________________________ >> >List sponsored by Redwood Alliance List Address: >> >RE-wrenches@lists.re-wrenches.org Change >> >listserver email address & settings: >> >http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >List-Archive: >> > >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >List rules & etiquette: >> >www.re-wrenches.org/etiquette.htm Check out or >> >update participant bios: www.members.re-wrenches.org >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org