Chris:
I have little Schneider experience but I will describe a problem with an Outback system that might be relevant: When the Outback Radian inverters would charge from the generator, in certain modes (there are a several generator utilization settings) the charging circuits would inject large amounts of THD onto the inverter output circuit. This would cause breaker tripping and other problems. To track this down we had to rent a pricey power quality analyzer. Here is a link <https://millersolar.com/MillerSolar/case_studies/25_GFI%20Tripping/GFI_Tripping.html> to a write-up I did. Hope this helps. William Miller Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com CA Lic. 773985 *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Chris Schaefer *Sent:* Monday, June 28, 2021 1:49 PM *To:* RE-wrenches *Subject:* [RE-wrenches] schneider xw-Pro issue with genny running G'day All, I recently got pulled into someone else's mess on a twin xw-pro 6848 with a Generac 20kw air cooled genny. A little back story. The client is currently off grid with basically an all electric house. I know, I know, lol. The intent is to bring the grid in but that has been slowed for various reasons. On to the issue. So the electric appliances do well until the genny is running/charging and then certain items like the electric dryer don't like to operate at this time. Turn the genny off and it runs fine. The genny only has 900 hours on it and is serviced by a local genny company. The client has no internet or InsightHome, only the SCP along wiith a Schneider AGS module. Admittedly I'm not overly familiar with the Schneider product line. I've reviewed every screen on the SCP looking for further genny settings but see no detailed adjustment that might be able to be made, to "smooth" things out so that the genny will play nice with the XW Pro and the dryer. I have reached out to Schneider directly but still no response after 5 days. Looking for any insight (no pun intended) from the Schneider users out there. Sincerely, Christopher- Chris Schaefer’s <http://www.solarandwindfx.com> *Tel/Fax 585-229-2083 or Cell 585-748-1870 * *5115 South Hill Road ~ Canandaigua New York 14424www.solarandwindfx.com <http://www.solarandwindfx.com> ~ E-mail: **ch...@solarandwindfx.com <ch...@solarandwindfx.com>* Thomas Jefferson, the author of our great Constitution, once said, "democracy" will cease to exist when you take away from those who are willing to work and give to those who would not."
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org