Hi All, I've run into a roof-mounted job where the roof is built-up with the following:
Comp shingle Plywood Foam board T&G (roof deck, but also interior ceiling) The beams that hold the t&g up are wide-spaced and not convenient for fastening the full extent of the array. This being the case, I was considering other fastening options and am writing to pick the collective brain of the Wrenches to see how others have addressed similar situations. One thought I had was to use the PLP Easy Mounting Foot and I'd be glad for any opinions on that or another solution. -Matt -- Matt Sherald PIMBY Energy, LLC 304-704-5943
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
