On Mar 29, 2023, at 11:04 AM, Jerry Shafer via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:
Wrenches
Sounds like a SIP's type product, there are quite a few multi hole attachment bases that are designed for SIP's. Most will have a larger base, lots of holes for screws to attach that do not require rafters underneath to attach.
I guess my questions are 1/2" plywood or 5/8" and how
thick is the foam? Oh and I assume its nominal 2X6 T&G? Do
you know how the plywood is attached?.....through the foam into
the T&G?... to stringers, nailers or whatever they're called?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
On 3/29/2023 7:53 AM, Dave Tedeyan via
RE-wrenches wrote:
Hi Matt,
I've used these in the past when on a comp roof and there
was no good way to get into the rafters (or TJI's in this
case)
I've run into a roof-mounted job where the roof is
built-up with the following:
Comp shingle
Plywood
Foam board
T&G (roof deck, but also interior ceiling)
The beams that hold the t&g up are wide-spaced and
not convenient for fastening the full extent of the
array.
This being the case, I was considering other fastening
options and am writing to pick the collective brain of the
Wrenches to see how others have addressed similar
situations.
One thought I had was to use the PLP Easy Mounting Foot
and I'd be glad for any opinions on that or another
solution.
-Matt
--
Matt Sherald
PIMBY Energy, LLC
304-704-5943
_______________________________________________
List sponsored by Redwood Alliance
There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette: http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios: http://www.members.re-wrenches.org