Wrenches Sounds like a SIP's type product, there are quite a few multi hole attachment bases that are designed for SIP's. Most will have a larger base, lots of holes for screws to attach that do not require rafters underneath to attach. Fun times
On Wed, Mar 29, 2023, 8:30 AM frenergy via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Matt, > > I guess my questions are 1/2" plywood or 5/8" and how thick is > the foam? Oh and I assume its nominal 2X6 T&G? Do you know how the > plywood is attached?.....through the foam into the T&G?... to stringers, > nailers or whatever they're called? > > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St.(shipping) > 5575 Genesee Rd. (USPS, UPS) > Taylorsville, CA 95983 > 530.284.1925 Office/ 530.258.1641 Cell > CA Lic 874049 > Solar powered since 1982 > > On 3/29/2023 7:53 AM, Dave Tedeyan via RE-wrenches wrote: > > Hi Matt, > I've used these in the past when on a comp roof and there was no good way > to get into the rafters (or TJI's in this case) > https://sunmodo.com/nanomount/ > > You might want to replace the screws with something shorter and beefier > though to get more grip if you are only going into 1/2" plywood. > > Cheers, > Dave > > On Wed, Mar 29, 2023 at 10:38 AM Matt Sherald via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > >> Hi All, >> >> I've run into a roof-mounted job where the roof is built-up with the >> following: >> >> Comp shingle >> Plywood >> Foam board >> T&G (roof deck, but also interior ceiling) >> >> The beams that hold the t&g up are wide-spaced and not convenient for >> fastening the full extent of the array. >> >> This being the case, I was considering other fastening options and am >> writing to pick the collective brain of the Wrenches to see how others have >> addressed similar situations. >> >> One thought I had was to use the PLP Easy Mounting Foot and I'd be glad >> for any opinions on that or another solution. >> >> -Matt >> >> -- >> Matt Sherald >> PIMBY Energy, LLC >> 304-704-5943 >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> > > -- > [image: Logo] <https://www.sungineersolar.com/> > Dave Tedeyan, P.E. > Owner | Sungineer Solar > p: he | him | his > a: 1653 Slaterville Rd. | Ithaca, NY 14850 > w: www.sungineersolar.com <http://www.sungineersolar.com/> > c: (607) 288-2898 > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette:http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:http://www.members.re-wrenches.org > > -- > > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virus-free.www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > <#m_5060834515090526244_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org