Hi, This was handled before, but there was a case sensitivity issue. Should be fixed now.
______________________________ Mikko Pallari Server Technical Lead in RealXtend ADMINO technologies www.adminotech.com www.realxtend.org -----Original Message----- From: realxtend@googlegroups.com [mailto:realxt...@googlegroups.com] On Behalf Of Heikki Törmälä Sent: 3. maaliskuuta 2009 8:30 To: realxtend@googlegroups.com Subject: [REX] Re: facegen > > Based on Mateo's comments, I think these instructions need to be modified > to include a 3.5 item under "Use FaceGen Modeller...": Scale the > photographs > to be exactly 512x512. > > After doing this, facegen works, and I can create a Jack.mesh on the > island > with my face; however, I cannot change my own avatar's face because even > though I can launch the Avatar Generator and pick my .mesh and face (which > look fine in Avatar Generator), an "Export" yields the following in > modrex: > > [REXCLIENT]: Unhandled GenericMessage (rexappearance) { } Does it work if you do a log out / log in after exporting? Iirc the viewer sends the rexappearance message after exporting to tell the server the avatar has changed, and so that the server can tell all the clients, including your own. Might be it's not handled yet in rexmod. - Heikki --~--~---------~--~----~------------~-------~--~----~ http://groups.google.com/group/realxtend http://www.realxtend.org -~----------~----~----~----~------~----~------~--~---
