I think you missed some of my post. :) Like I said,
IP-Masquerading works perfectly. Thus, all of this has been done...
-----------------------------------------------------------
Matt Housh email: [EMAIL PROTECTED]
MicroComputer Specialist University of Tulsa
Engineering and Natural Sciences
"I don't remember yesterday. And today, it rained."
On Fri, 5 Jun 1998, Eric L. Green <[EMAIL PROTECTED]> wrote:
> On Thu, 4 Jun 1998, Matt Housh wrote:
> > just configured diald incorrectly, but here's the problem: When I try to
> > get to something outside from the gateway machine, it works great. Diald
> > dials the modem and after it connects, whatever I'm trying (telnet, ssh,
> > ftp, etc...) works. But I can't get it to work when I try to contact
> > something outside the gateway from any of the machines inside the lan.
> > Diald doesn't even get any packets. Anyone know how to fix this?
>
> Make sure that your other machines have your internal machine set as their
> gateway. If your other machines are Win95, use the network control panel
> to set the gateway. If they're Linux, check /etc/sysconfig/network to make
> sure a GATEWAYDEV and GATEWAY are set.
>
> The next thing to check is whether you have IP Forwarding turned on. Make
> sure that in /etc/sysconfig/network it says "FORWARD_IPV4=yes". (Note that
> this is with RH 5.0 and up, I don't recall if RH 4.2 did this). Without IP
> forwarding the packets will never get forwarded to the SLIP port that
> activates diald.
>
> Eric Lee Green [EMAIL PROTECTED] Executive Consultants
> Systems Specialist Educational Administration Solutions
> See http://members.tripod.com/~e_l_green
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
