>
> If I had had a larger HD to install on, I am sure I wouldn't have had any
> problems. However, I only have 100 megs set aside from my 2g, and 270 megs
> for a another HD. And my root is on the 270 meg HD. It doesn't seem to
> want to upgrade all that well. I did a total reinstall. I don't know why,
> but when I install (after selecting the things I want), it says it will
> install 200 megs of stuff. It actually installs 240 megs of stuff. Maybe
> it is just because there are tonnes of small files which take up the blocks.
> Is there anyway for me to format with RedHat to make my inodes smaller? I
> think the default is 4096 bytes isn't it?
>
It is possible to do an upgrade in limited space but you have to be
careful. I have a 285 MB root partition with with 6 MB free right now
and have done successful upgrades without too much trouble. Before
starting the upgrade, I remove packages that are big or I don't
immediately need and install them later if I have the space. Then I
do the upgrade, constantly checking that free space isn't running out,
and pray it succeeds. If it doesn't, I restart the upgrade and try
again; I haven't completely hosed my system yet. You have to choose
the manual option and only install the packages that you must to get
the system working.
The default block size on ext2 is 1024 bytes. This keeps the external
fragmentation down and reduces the wasted space to a fairly minor
amount. Also, the default is 1 inode for every 4096 bytes. Inodes do
use up some of the total space of the partition and you could increase
the ratio to reduce the number of inodes. But it takes reformatting
the entire partition to change number of inodes (and increase it if
you run out of inodes) and the saving aren't that big.
> As for the fact that RH install sucks. It does suck. The reason being, is
> that they don't check for HD space. If you deselect as86 assembler, then
> try to make a new kernel, it tells you right at the end that command not
> found for as86. It should tell you this in the install. After all,
> recompiling a kernel is a very important aspect of Linux.
>
If you are going to do a manual install, you must have some idea about
what each package does so you don't deselect something important like
bin86. Read the package info; it says bin86 is required for compiling
kernels.
- Ian
--
[EMAIL PROTECTED] http://www-leland.stanford.edu/~iburrell/
"I have a very firm grasp on reality! I can reach out and strangle it
any time!"
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.