Welll....  I'm going to add to a previous post...

On Mon, Aug 21, 2000 at 03:26:35PM -0700, Julius Smith wrote:

> >         That being said, you're probably in trouble anyways.  I have it
> >on reliable authority (the Lucent people, who would know) that the PCI
> >interface card doesn't work with the Linux PCMCIA stuff.  They say that
> >they PCMCIA gang is aware of the problem.  They also claim the ISA card
> >does work.
> >... I can verify
> >that the PCI card is NOT recognized by either the TCIC nor the Intel PCIC.

> That's depressing news, but thanks *very much* for your post.
> Do you think I should the hardware or wait for Lucent to fix it?

        The Lucent PCI/PCMCIA bridge uses the Texax Instruments PCI1225
chip.  That is NOW explicit documented as being supported.  That's per
the pcmcia 3.1.19 PCMCIA-HOWTO file.  But!  I still can't get it to
work.  I've now seen some references on the pcmcia-cs site at Source Forge
about some options to get this to work, but I haven't found them yet.
If I find it, I will post it.

        I have found one SERIOUS thing though...  If I boot my system
with a wavelan card in the PCI card (and it's not being found) I'm
loosing interrupts on hda.  Remove the card, and everything is fine.
Card in, the system sucks.  Maybe if the bridge was properly recognized,
I wouldn't have this problem.

> Thanks,
> Julius


        Mike
-- 
 Michael H. Warfield    |  (770) 985-6132   |  [EMAIL PROTECTED]
  (The Mad Wizard)      |  (678) 463-0932   |  http://www.wittsend.com/mhw/
  NIC whois:  MHW9      |  An optimist believes we live in the best of all
 PGP Key: 0xDF1DD471    |  possible worlds.  A pessimist is sure of it!



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to