On Tue, Nov 14, 2000 at 11:32:23PM -0500, Charles Galpin wrote:
> Hi all.
>
> -----Original Message-----
> From: Ted Gervais <[EMAIL PROTECTED]>
> >Charles -
> >Try running 'lilo' with a captial 'L'. (lilo -L)...
> >See if that fixes your problem.
> >
> >It did for me.
>
> Nope, linear addressing makes no difference.
Lemme throw out a completely wild guess here...
Perhaps the old brain-dead BIOS just doesn't like LILO being on the MBR ?
There are other LILO configurations,... perhaps something like installing
the LILO bootblock in your /boot or /root partitions and reinstalling
the old MS bootblock on the MBR ??
Fred
>
> -----Original Message-----
> From: Mikkel L. Ellertson <[EMAIL PROTECTED]>
>
> >Try running cfdisk, and mark one of your partations bootable. I have
> >seen this messages on some systems when you do not have any partations
> >marked as bootable on your first hard drive.
> >
> >Mikkel
>
>
> looks fine to me:
>
> [root@fw cgalpin]# fdisk -l /dev/hda
>
> Disk /dev/hda: 128 heads, 63 sectors, 969 cylinders
> Units = cylinders of 8064 * 512 bytes
>
> Device Boot Start End Blocks Id System
> /dev/hda1 * 1 2 8032+ 83 Linux
> /dev/hda2 3 969 3898944 5 Extended
> /dev/hda5 3 475 1907104+ 83 Linux
> /dev/hda6 476 606 528160+ 83 Linux
> /dev/hda7 607 672 266080+ 83 Linux
> /dev/hda8 673 738 266080+ 83 Linux
> /dev/hda9 739 804 266080+ 83 Linux
> /dev/hda10 805 870 266080+ 83 Linux
> /dev/hda11 871 936 266080+ 83 Linux
> /dev/hda12 937 969 133024+ 82 Linux swap
> [root@fw cgalpin]# df -h
> Filesystem Size Used Avail Use% Mounted on
> /dev/hda10 252M 36M 203M 15% /
> /dev/hda1 7.6M 2.5M 4.7M 34% /boot
> /dev/hda9 252M 13k 238M 1% /cache
> /dev/hda8 252M 13k 238M 1% /chroot
> /dev/hda5 1.8G 40k 1.6G 1% /home
> /dev/hda11 252M 14k 238M 1% /tmp
> /dev/hda6 508M 164M 317M 35% /usr
> /dev/hda7 252M 4.7M 233M 2% /var
>
> The machine doesn't think I have a hard drive installed, but linux does:
>
> ov 14 17:04:13 fw kernel: RZ1000: IDE controller on PCI bus 00 dev 50
> Nov 14 17:04:13 fw kernel: RZ1000: not 100% native mode: will probe irqs
> later
> Nov 14 17:04:13 fw kernel: ide0: disabled chipset read-ahead (buggy
> RZ1000/RZ1001)
> Nov 14 17:04:13 fw kernel: ide1: disabled chipset read-ahead (buggy
> RZ1000/RZ1001)
> Nov 14 17:04:13 fw kernel: hda: WDC AC34000L, ATA DISK drive
> Nov 14 17:04:13 fw kernel: hdd: , ATAPI CDROM drive
> Nov 14 17:04:13 fw kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Nov 14 17:04:13 fw kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Nov 14 17:04:13 fw kernel: hda: WDC AC34000L, 3815MB w/256kB Cache,
> CHS=7752/16/63
> Nov 14 17:04:13 fw kernel: Partition check:
> Nov 14 17:04:13 fw kernel: hda: [PTBL] [969/128/63] hda1 hda2 < hda5 hda6
> hda7 hda8 hda9 hda10 hda11 hda12 >
>
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
--
---- Fred Smith -- [EMAIL PROTECTED] ----------------------------
The eyes of the Lord are everywhere,
keeping watch on the wicked and the good.
----------------------------- Proverbs 15:3 (niv) -----------------------------
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
