** Reply to message from Rick Warner <[EMAIL PROTECTED]> on Fri, 24
Nov 2000 09:52:26 -0800 (Pacific Standard Time)


> > Sorry, I wasn't clear. I pinged from all 3 boxes with the same result.
> > The salient fact is that it works with one hub perfectly and not TWO
> > others (I just tried another brand of hub this morning) with the same
> > settings. And none of the cables are attached to the uplink port of the
> > hubs. Strange. Must be something internal to the hubs.

> Silly question: are all the hubs equal?  Are they single speed?  If so,
> are they the same speed?  Some single speed, some dual?  The problems
> sound as if the NICs and some of the hubs are operating at different
> speeds, while the NICs and the working hub are operating at the same
> speed.  

I have 10 and 100 NICS in the network. So I have throttled all of the
NICs down to 10 (ifconfig eth0 txqueuelen 10) and confirmed it via
ifconfig. HOWEVER, the hub that works is ONLY a 10 speed.  The ones that
don't work claim to be able to adjust speeds to prevailing bitrate. But
perhaps they are not. If this is the case, then you may be right.

Jack Bowling
Prince George, BC
mailto:[EMAIL PROTECTED]




_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to