dump. It is the old Berkeley filesystem backup program. Sun's ufsdump
is merely their update of the same program.
- rick warner
On Tue, 20 Nov 2001, dfp10 wrote:
> Hello!
> I have been using the following script for Solaris and need to find linux
> equivalents for the following programs:
> ufsdump (dumpe2fs?)
> prtvtoc
> and there are several more that I am not sure about.
> Thanks,
> Don Parsons
>
> ************************************
> #!/bin/sh
> # @(#) backup-script 1.2 95/09/15
> #
> # simple dump script /usr/bin/ufsscript to do full dump of an entire system
> #
> # edit the following to suit your configuration
> #
> TAPE=/dev/rmt/0mbn # this should be the non-rewinding tape device
>
> # use this for 2.3 GB 8mm drives
> #DUMPPARM="0ubdsf 126 54000 6000"
>
> # use this for 5GB (4mm & 8mm) drives
> # DUMPPARM="0ubdsf 126 54000 13000"
> # same but COMPRESSED
> DUMPPARM="0ubdsf 126 54000 26000"
> # DUMPPARM="0ubdsf 126 50800 740"
> # DUMPPARM="0cfu"
> # run from a shell tool or a cron. By default it backs up the entire
> # system. For incremental backups replace the DUMPPARM line with
> # DUMPPARM="xubdsf 126 nnnnnn nnnnn"
> # the x in place of 0 means incremental dump, or only the stuff
> # thats changed since the last since the last incremental dump was
> # done. Take a full (level 0)and save it in case of hd cashes.
> # Periodically run an incremental or a full dump (depending on the
> # amount of data change on the machine
> # to dump specific filesystems, set FILESYS to a list of
> # the devices you want to dump. If FILESYS is null, all
> # ufs filesystems listed in /etc/vfstab will be dumped.
> FILESYS=""
>
> # to print useful recovery information (disk layout, dump list)
> # set PRINTER to the name of the printer you wish to spool
> # the output to. If PRINTER is null, no output will be produced
> PRINTER=parsons
>
> #----- shouldn't have to modify anything below here -----
>
> getfs() {
> if [ -z "$FILESYS" ]; then
> FILESYS=`awk '$1 !~ /^#/ && $4 == "ufs" {print $2}' </etc/vfstab`
> fi
> }
>
> getrootdisk() {
> ROOTDISK=`awk '$1 !~ /^#/ && $3 == "/" {print $2}' </etc/vfstab |
> sed -e 's/$s./s2/'`
> }
>
>
> # start of actual process
>
> PATH=/usr/bin:/usr/sbin:/sbin; export PATH
>
> echo "Dump started at `date`"
> mt -f $TAPE rewind
>
> getfs
>
> for i in $FILESYS
> do
> echo "Starting $i at `date`"
> ufsdump $DUMPPARM $TAPE $i >/dev/null
> echo ufsdump $DUMPPARM $TAPE $i
> echo "Finished $i at `date`"
> done
>
> if [ -n "$PRINTER" ];
> then
> (
> echo "Dump done on `date`"
> echo ""
> echo "Tape contains the following partitions, in sequence"
> for i in $FILESYS
> do
> echo $i
> done
> echo ""
> getrootdisk
> prtvtoc $ROOTDISK
> ) | lp -d$PRINTER
> # unexpected end of file at last line
> fi
> *******************************
>
> ###############################################################
> Donald F. Parsons MB.BS, Ph.D, Research Physician,Wadsworth Ctr
> NY State Dept of Health, ESP Box 509, Albany NY 12201-0509
> [EMAIL PROTECTED] (518)474-7047
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
