Yes, but I thought I read that you can't use dump anymore on with 2.4
Linux kernels because of potential filesystem corruption problems.
Dave
> From: Rick Warner <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
>
> dump. It is the old Berkeley filesystem backup program. Sun's ufsdump
> is merely their update of the same program.
>
> - rick warner
>
> On Tue, 20 Nov 2001, dfp10 wrote:
>
> > Hello!
> > I have been using the following script for Solaris and need to find linux
> > equivalents for the following programs:
> > ufsdump (dumpe2fs?)
> > prtvtoc
> > and there are several more that I am not sure about.
> > Thanks,
> > Don Parsons
> >
> > ************************************
> > #!/bin/sh
> > # @(#) backup-script 1.2 95/09/15
> > #
> > # simple dump script /usr/bin/ufsscript to do full dump of an entire system
> > #
> > # edit the following to suit your configuration
> > #
> > TAPE=/dev/rmt/0mbn # this should be the non-rewinding tape device
> >
> > # use this for 2.3 GB 8mm drives
> > #DUMPPARM="0ubdsf 126 54000 6000"
> >
> > # use this for 5GB (4mm & 8mm) drives
> > # DUMPPARM="0ubdsf 126 54000 13000"
> > # same but COMPRESSED
> > DUMPPARM="0ubdsf 126 54000 26000"
> > # DUMPPARM="0ubdsf 126 50800 740"
> > # DUMPPARM="0cfu"
> > # run from a shell tool or a cron. By default it backs up the entire
> > # system. For incremental backups replace the DUMPPARM line with
> > # DUMPPARM="xubdsf 126 nnnnnn nnnnn"
> > # the x in place of 0 means incremental dump, or only the stuff
> > # thats changed since the last since the last incremental dump was
> > # done. Take a full (level 0)and save it in case of hd cashes.
> > # Periodically run an incremental or a full dump (depending on the
> > # amount of data change on the machine
> > # to dump specific filesystems, set FILESYS to a list of
> > # the devices you want to dump. If FILESYS is null, all
> > # ufs filesystems listed in /etc/vfstab will be dumped.
> > FILESYS=""
> >
> > # to print useful recovery information (disk layout, dump list)
> > # set PRINTER to the name of the printer you wish to spool
> > # the output to. If PRINTER is null, no output will be produced
> > PRINTER=parsons
> >
> > #----- shouldn't have to modify anything below here -----
> >
> > getfs() {
> > if [ -z "$FILESYS" ]; then
> > FILESYS=`awk '$1 !~ /^#/ && $4 == "ufs" {print $2}' </etc/vfstab`
> > fi
> > }
> >
> > getrootdisk() {
> > ROOTDISK=`awk '$1 !~ /^#/ && $3 == "/" {print $2}' </etc/vfstab |
> > sed -e 's/$s./s2/'`
> > }
> >
> >
> > # start of actual process
> >
> > PATH=/usr/bin:/usr/sbin:/sbin; export PATH
> >
> > echo "Dump started at `date`"
> > mt -f $TAPE rewind
> >
> > getfs
> >
> > for i in $FILESYS
> > do
> > echo "Starting $i at `date`"
> > ufsdump $DUMPPARM $TAPE $i >/dev/null
> > echo ufsdump $DUMPPARM $TAPE $i
> > echo "Finished $i at `date`"
> > done
> >
> > if [ -n "$PRINTER" ];
> > then
> > (
> > echo "Dump done on `date`"
> > echo ""
> > echo "Tape contains the following partitions, in sequence"
> > for i in $FILESYS
> > do
> > echo $i
> > done
> > echo ""
> > getrootdisk
> > prtvtoc $ROOTDISK
> > ) | lp -d$PRINTER
> > # unexpected end of file at last line
> > fi
> > *******************************
> >
> > ###############################################################
> > Donald F. Parsons MB.BS, Ph.D, Research Physician,Wadsworth Ctr
> > NY State Dept of Health, ESP Box 509, Albany NY 12201-0509
> > [EMAIL PROTECTED] (518)474-7047
> >
> >
> >
> >
>
>
>
>
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list