Answering the three respondents who haven't given up on me as a hopeless
case...
At 02:42 PM 11/20/01 -0700, you wrote:
>Here's how I have it setup: (only difference is we use static
>IP there, but concept is the same)
>
>RH 7.1 box uses IPTABLES to connect clients to net. Simplified example
>below:
>
>server name: mail
>client1: donna
>client2: briana
>client3: mark
>64.122.X.Y 192.168.0.2 /-------------Mark
>(192.168.0.4)
>---------\
>/-------------------------------------donna(192.1668.0.10)
> |----------------|
>\------------briana(192.168.0.12)
> | eth0 eth1 |
> |----------------|
>
>Config on any of the clients:
>DNS: Enabled
>Name: <clientname>.their_tld.com
>dns server 1: 192.168.0.2
>dns server 2: <their ISP's name server>
>gateway: 192.168.0.2
Hmmm... Before I attempt this, it seems to me that if your gateway is
192.168.0.2, then I need to either change my NETWORK in ifcfg-eth0 to that
same address OR change your gateway to 192.168.1.0 and input that into my
Doze box. Correct?
>/etc/rc.d/rc.local last few lines:
>/usr/sbin/firewall-script
># load amavis daemons for mail virus scanning
>su -c /usr/sbin/amavisd - amavis
Just for my own understanding, would you mind explaining this last line?
Who is the user? What's the binary command? What is meant by the dash not
immediately next to something else?
>/usr/sbin/firewall-script:
>[ `lsmod | grep ipchain | awk '{print $1}'` ] && rmmod ipchains
>modprobe ip_tables
>modprobe ip_nat_ftp
>modprobe ip_connntrack_ftp
>echo 1 > /proc/sys/net/ipv4/ip_dynaddr
>echo 1 > /proc/sys/net/ipv4/ip_forward
>IPTABLES=/sbin/iptables
>echo " - Enabling SNAT (IPMASQ) functionality on eth0"
>$IPTABLES -t nat -A POSTROUTING -o eth0 -j MASQUERADE
>exit
Harry Putnam writes, in essence:
> Let's see your netstat -nr:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 40 0
0 eth0
216.9.0.0 0.0.0.0 255.255.255.0 U 40 0
0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 40 0
0 lo
0.0.0.0
206.9.0.1 0.0.0.0 UG 40 0 0 eth1
Kevin MacNeil writes:
> > vi /etc/sysconfig/network-scripts/ifcfg-eth0
> Shouldn't the netmask be 255.255.255.0?
Yeah. Typo.
Thanks,
BenO
----- Original Message -----
>From: "Ben Ocean" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Tuesday, November 20, 2001 1:24 PM
>Subject: Networking: The Saga, The Sequel
>
>
> > Hello yet again;
> >
> > First up, I_have_done_my_homework. I've probably spent a good 60 hours
> > trying to figure this problem out to date. I'm beginning to understand the
> > lingo now. Hopefully, with your help, I can get it right this time.
> >
> > Secondly, I have gone through all of the old posts to try and (a) glean
> > understanding, and (b) address *all* your questions/concerns at the outset
> > (to the best of my ability).
> >
> > Okay, so yeah, still don't have the *(&%$#*% boxes configured.
> >
> > TOC
> >
> > I outline the problem,
> > show the network configuration via diagram,
> > show the configuration on the Doze box,
> > show the configuration on the RH box,
> > then finally show the problems I am having at the command line in RH
> >
> >
> > OUTLINING THE PROBLEM
> >
> > I am currently able to ping from the Doze box to the RH box. I cannot
> > resolve anything else on the Doze box. I can surf the Internet, etc. from
> > the RH box.
> >
> >
> > NETWORK CONFIGURATION
> >
> > I have a Linux box RH71 that is connected to the Internet via DSL with
> > dynamically generated IP addresses. That box is connected to a Doze '98
>box.
> >
> > **Note: If there are discrepancies between the addresses listed
>immediately
> > below and those in the files, the files are to be considered more
>reliable.
> >
> > _______ _____ ____________
> > ____ { ~~~~~~ }
> > / Doze98 \-------------------->/ RH71 \----------------->/ DSL
> > *Modem*\------------------>/ ISP \----------------->{ Internet }
> > \________/ \
> > _____/ \____________/ \____/
> > { ~~~~~~}
> > IP: 192.168.1.2 IP: 192.168.1.1 ??? IP: either dsl.cnw.net; cnw.net;
> > 206.40.133.20; 206.129.112.21
> > Gate: 192.168.1.1 Gate: 192.168.1.1 ??? ???
> > Subn: 255.255.255.0 Subn: 255.255.255.0 ??? ???
> >
> >
> > CONFIGURATION ON THE DOZE BOX
> >
> > Control Panel >> Networking >> Configuration >> TCP/IP 3Com Ethernet
> > blah-blah (double-click)
> > IP Address >> Specify an IP address >>
> > IP Address 192.168.1.2
> > Subnet Mask 255.255.255.0
> > DNS Configuration >> Gateway >> Name Servers >> Add
> > 192.168.1.1
> > 206.40.133.20
> > 206.129.112.21
> >
> >
> > CONFIGURATION ON THE RH BOX
> >
> > ifconfig -a
> >
> > eth0 Link endcap:Ethernet HWaddr 00:04:75:71:2B:3D
> > inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:19 error:0 dropped:0 overruns:0 frame:0
> > TX packets:0 error:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txquelen:100
> > Interrupt:11 Base address:0x2400
> >
> > eth1 Link endcap:Ethernet HWaddr 00:40:D0:0C:B2:22
> > inet addr:216.9.0.125 Bcast:216.9.0.255 Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:16 error:0 dropped:0 overruns:0 frame:0
> > TX packets:21 error:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txquelen:100
> > Interrupt:10 Base address:0x2000
> >
> > lo Link endcap:Local Loopback
> > indet addr:127.0.0.1 Mask:255.0.0.0
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > RX packets:6 error:0 dropped:0 overruns:0 frame:0
> > TX packets:6 error:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txquelen:0
> >
> >
> > vi /etc/sysconfig/network-scripts/ifcfg-eth0
> >
> > DEVICE=eth0
> > BOOTPROTO=static
> > BROADCAST=192.168.1.255
> > IPADDR=192.168.1.1
> > NETMASK=255.255.225.0
> > NETWORK=192.168.1.0
> > ONBOOT=yes
> >
> >
> > vi /etc/sysconfig/network-scripts/ifcfg-eth1
> >
> > DEVICE=eth1
> > BOOTPROTO=dhcp
> > ONBOOT=yes
> >
> >
> > vi /etc/sysconfig/network-scripts/ifcfg-lo
> >
> > DEVICE=lo
> > IPADDR=127.0.0.1
> > NETMASK=255.0.0.0
> > NETWORK=127.0.0.0
> > BROADCAST=127.255.255.255
> > ONBOOT=yes
> > NAME=loopback
> > BOOTPROTO=none
> >
> >
> > vi /etc/named.conf
> >
> > options {
> > forwarders {
> > 206.40.133.20
> > 206.129.112.21
> > };
> > };
> > zone "." IN {
> > type hint;
> > file "named.ca";
> > };
> > zone "localhost" IN {
> > type master;
> > file "localhost.zone";
> > allow-update { none; };
> > };
> > zone "0.0.127.in-addr.arpa" IN {
> > type master;
> > file "named.local";
> > allow-update { none; };
> > };
> > key "key" {
> > algorithm hmac-md5;
> > secret "stuff-I-shouldn't-repeat";
> > };
> >
> >
> > vi /etc/dhcpd.conf
> >
> > subnet 192.168.1.0 netmask 255.255.255.0 {
> > range 192.168.1.2 192.168.1.60;
> > default-lease-time 86400;
> > max-lease-time 86400;
> > option routers 192.168.1.1;
> > option broadcast-address 192.168.1.255;
> > option subnet-mask 255.255.255.0;
> > option domain-name-servers 192.168.1.1, 206.40.133.20, 206.129.112.21;
> > }
> >
> >
> > vi /etc/resolv.conf
> >
> > search dsl.cnw.net cnw.net
> > nameserver 206.40.133.20
> > nameserver 206.129.112.21
> >
> >
> > vi /etc/modules.conf
> >
> > alias eth0 3c59x
> > alias eth1 tulip
> > alias parport_lowlevel parport_pc
> > alias usb-controller usb-uhci
> >
> >
> > CONFIGURING MASQUERADING
> >
> > vi /etc/rc.d/rc.masq
> >
> > /sbin/depmod -a
> > /sbin/modprobe ip_masq_ftp
> > /sbin/ipchains -P forward DENY
> > /sbin/ipchains -A forward -s 192.168.1.2/24 -j MASQ
> > ## I do have other IPchains installed...
> >
> > chmod 700 /etc/rc.d/rc.masq
> >
> > vi /etc/sysconfig/network
> >
> > NETWORKING=yes
> > HOSTNAME=localhost.localdomain
> > FORWARD_IPV=true
> >
> > vi /etc/rc.d/rc.local
> >
> > (at the end of the file...)
> > /etc/rc.d/rc.masq
> >
> >
> > PROBLEMS
> >
> > ipfwadm -F -f
> > Chains are empty (ie. ipfwadm has not been used on them).
> > ## Is this even a problem? I don't need IPchains AND IPtables AND IPfwadm,
> > just any one of those, correct?
> >
> > modprobe ipt_MASQUERADE
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o: init_module:
> > Device or resource busy
> > Hint: insmod errors can be caused by incorrect module parameters,
>including
> > invalid IO or IRQ parameters
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o: insmod
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o failed
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o: insmod
> > ipt_MASQUERADE failed
> >
> > iptables -t nat -L
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o: init_module:
> > Device or resource busy
> > Hint: insmod errors can be caused by incorrect module parameters,
>including
> > invalid IO or IRQ parameters
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o: insmod
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o failed
> > /lib/modules/2.4.2-2/kernel/net/ipv4/netfilter/ip_tables.o: insmod
> > ip_tables.o failed
> > iptables v1.2.1a: can't initialize iptables table 'nat': iptables who? (do
> > you need to initialize insmod?)
> > Perhaps iptables or your kernel needs to be upgraded
> >
> > /usr/sbin/ndc start
> > bash: /usr/sbin/ndc start: No such file or directory
> > ## This, in fact, may be the WHOLE PROBLEM...?
> >
> > TIA,
> > BenO
> >
> >
> >
> >
> > _______________________________________________
> > Redhat-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/redhat-list
> >
>
>
>
>_______________________________________________
>Redhat-list mailing list
>[EMAIL PROTECTED]
>https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list