Hello Bill, Check if ipchains is loaded, otherwise just run "insmod ipchains" before the whole script.
Cheers, Pieter -----Original Message----- From: BG [mailto:[EMAIL PROTECTED]] Sent: 18 March 2002 18:42 To: [EMAIL PROTECTED] Subject: Please help with IP Masquerading Hi All, I have setup a new dual boot machine with W2k and RH 7.2. I want to test the reliability and speed differences between IP Masquerading and Internet Connection Sharing. This new machine has 2 ethernet cards, one goes to the cable modem and the other to the internal network (static ip addr = 192.168.0.1). I have tested the machne for internet access in RH 7.2 and all works fine. Also, I can ping the machine from all other internal network machines just fine. I was previously running RH 7.1, an upgrade from 7.0, as my internet server using IP Masquerading on another machine I have tucked away untouched as a backup. The new machine as above is intended to replace this backup machine. I added to my rc.d file on the new machine the following from my old machine: # IP Masquerading echo 1 > /proc/sys/net/ipv4/ip_forward extip = "`/sbin/ifconfig eth1 | grep | 'inet addr' | awk '{print $2}' | sed -e 's/.*://'`" /sbin/ifconfig lo 127.0.0.1 /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo /sbin/ifconfig eth0 192.168.0.1 /sbin/ifconfig eth1 $extip /sbin/route add $extip eth1 /sbin/route add -net 192.168.0.0.0 eth0 echo "loading IP Masquerading Modules..." /sbin/depmod -a /sbin/modprobe ipip /sbin/modprobe ip_masq_ftp /sbin/modprobe ip_masq_raudio /sbin/modprobe ip_masq_irc /sbin/modprobe ip_masq_autofw /sbin/modprobe ip_masq_cuseeme /sbin/modprobe ip_masq_portfw /sbin/modprobe ip_masq_quake /sbin/modprobe ip_masq_user /sbin/modprobe ip_masq_vdolive echo -n "Forward..." /sbin/ipchains -F forward /sbin/ipchains -P forward DENY /sbin/ipchains -A forward -j MASQ -s 192.168.0.0/24 /sbin/ipchains -A forward -s 0.0.0.0/0 -d 0.0.0.0/0 -l -j REJECT echo "done." This always worked fine on my old machine, but I get alot of errors during boot on the new machine during run of rc.d. The error messages fly by so fast I can't read them. IP masquerading does not work on the new machine. Please help. Thanks, Bill _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
