thanks!
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Pieter De Wit > Sent: Monday, March 18, 2002 10:55 PM > To: '[EMAIL PROTECTED]' > Subject: RE: Please help with IP Masquerading > > > Hello Bill, > > Check if ipchains is loaded, otherwise just run "insmod > ipchains" before the > whole script. > > Cheers, > > Pieter > > -----Original Message----- > From: BG [mailto:[EMAIL PROTECTED]] > Sent: 18 March 2002 18:42 > To: [EMAIL PROTECTED] > Subject: Please help with IP Masquerading > > > Hi All, > > I have setup a new dual boot machine with W2k and RH 7.2. I > want to test > the reliability and speed differences between IP Masquerading > and Internet > Connection Sharing. This new machine has 2 ethernet cards, > one goes to the > cable modem and the other to the internal network (static ip addr = > 192.168.0.1). I have tested the machne for internet access > in RH 7.2 and > all works fine. Also, I can ping the machine from all other internal > network machines just fine. > > I was previously running RH 7.1, an upgrade from 7.0, as my > internet server > using IP Masquerading on another machine I have tucked away > untouched as a > backup. The new machine as above is intended to replace this backup > machine. > > I added to my rc.d file on the new machine the following from my old > machine: > > # IP Masquerading > echo 1 > /proc/sys/net/ipv4/ip_forward > extip = "`/sbin/ifconfig eth1 | grep | 'inet addr' | awk > '{print $2}' | sed > -e 's/.*://'`" > /sbin/ifconfig lo 127.0.0.1 > /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo > /sbin/ifconfig eth0 192.168.0.1 > /sbin/ifconfig eth1 $extip > /sbin/route add $extip eth1 > /sbin/route add -net 192.168.0.0.0 eth0 > echo "loading IP Masquerading Modules..." > /sbin/depmod -a > /sbin/modprobe ipip > /sbin/modprobe ip_masq_ftp > /sbin/modprobe ip_masq_raudio > /sbin/modprobe ip_masq_irc > /sbin/modprobe ip_masq_autofw > /sbin/modprobe ip_masq_cuseeme > /sbin/modprobe ip_masq_portfw > /sbin/modprobe ip_masq_quake > /sbin/modprobe ip_masq_user > /sbin/modprobe ip_masq_vdolive > echo -n "Forward..." > /sbin/ipchains -F forward > /sbin/ipchains -P forward DENY > /sbin/ipchains -A forward -j MASQ -s 192.168.0.0/24 > /sbin/ipchains -A forward -s 0.0.0.0/0 -d 0.0.0.0/0 -l -j REJECT > echo "done." > > This always worked fine on my old machine, but I get alot of > errors during > boot on the new machine during run of rc.d. The error > messages fly by so > fast I can't read them. IP masquerading does not work on the > new machine. > > Please help. > > Thanks, > Bill > > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list > _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list