I had a problem like that with two cards (sound and network) I tried a lot of things (the configuration worked fine in windows), even assigning irq's and io's because i saw that one of the cards couldn't get the config it expected (btw i posted messages asking why isapnp could not force some values but i got no answer)
at the end i just modified modules.conf to load the network module first and it worked. don't ask me why !!! hth A 09:12 29/07/02 +0530, vous avez écrit : >u can try changing the tulip driver with de4x5 driver >1) remove the tulip driver from conf.modules and reboot >2) insmod or depmod de4x5 and try to configure ur ip addr. >This should help u out >Regards. >Mohd Irfan R Khan > ----- Original Message ----- > From: Mark > To: [EMAIL PROTECTED] > Sent: Saturday, July 27, 2002 10:03 PM > Subject: Help w/ Tulip NIC and Buslogic SCSI card > > > All, > > I've been building some new machines and run into a problem. In my systems, I have Znyx ZX346 NIC's, these are four port 10/100 PCI cards using thte DEC tulip 21140 chip. I also have a Buslogic (Mylex) BT-958D in each system. Using RH 7.3, the systems run fine with either the SCSI card or the NIC install, but NOT both. It seems there is some conflict between them. I've done some reading and it seems that the tulip NIC's are well supported by Linux as is the Buslogic card (and as I said they both work fine on their own). > > When I have them both in the system, RH will boot fine. It configures eth0 fine and all looks good. However, I can not send any packets in or out of the system. The SCSI card appears to work correctly as I can r/w to the drives on that card. When the tulip driver is being loaded at boot time I get an error message (dmesg) about the PCI instance having an unknow header. I also get tulip: missing EEPROM at xxxx, interface may not work correctly. Would changing the order the drivers are loaded help possibly? Anyone have other ideas that might get me both network and SCSI connectivit? Any and all help is greatly appreciated. > > TIA, > > Mark > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.380 / Virus Database: 213 - Release Date: 7/24/2002 > >Attachment Converted: "d:\app\net\eudora\attach\ReHelpwT" > - * - * - * - * - * - * - Bien sûr que je suis perfectionniste ! Mais ne pourrais-je pas l'être mieux ? Thierry ITTY eMail : [EMAIL PROTECTED] FRANCE _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
