Firestarter, at least when i tried it out, created too many unnecessary rules, made kind of a mess.
Brewing your own gives you a much finer grain of control. On 5 Sep 2002, Anthony Abby wrote: > Kevin, skip home-brewed IPTables and use firestarter > (http://firestarter.sourceforge.net). It'll write your IPTables for you > as well as NAT and Port Forwarding. Check it out. > > Anthony > > On Thu, 2002-09-05 at 21:06, Kevin - KD Micro Software wrote: > > Hi all, > > > > I've spoken to a couple of people who tried port forwarding using iptables > > and apparently it's not an easy task to accomplish. I've tried myself and > > don't seem to have any luck whatsoever either (after reading numbers of > > HOWTOs etc) so I'm asking here as a last resort. > > > > Just to makes things easier, i'll try to give as much info as possible, > > using the following example: > > I would like port 8181 on my Red Hat box (7.2, kernel 2.4.9-34, let's say ip > > is 1.1.1.1 (example only)) to be forwarded to port 80 on internal machine IP > > 1.1.1.2. I understand that machines on the internal network (eth0) would not > > be able to make use of this, but as long as it works from the net connection > > (ppp0) then that is ok. That's all I need. But, of course, if there is a way > > where this would work for both then thats even better. > > > > Has anyone actually managed to get this working right? > > Any help would be greatly appreciated. > > > > > > > -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list