try the following command and see if it works

ping -I 10.1.1.2 10.1.5.1

rahul.

On Fri, 27 Sep 2002, Matthew Boeckman wrote:

>
> > Hmm. Are saying that if you try to ping the eth1 interface from a
> > machine attached to the network on eth0 it does not work?  If so what is
> > does the routing table on the ping orignating machine look like?  It
> > needs to be told that the router is the gateway to that network.
>
> to refresh, the router's addresses are eth0 - 10.1.1.2 and eth1 10.1.5.1
> on the router, if I:
> ping 10.1.1.2
> or
> ping 10.1.5.1 it's fine
>
> HOWEVER if i
> ping -I eth0 10.1.5.1 (ping from eth0 to eth1) it fails
> or
> ping -I eth1 10.1.1.2 it also fails
>
> i don't actually have anything else plugged into it at this point,
> trying to iron all this out prior to it going live. However, I just
> tried the same test (pinging from an eth0 to an eth1) on a
> iptables-nat-fw box i have. This box forwards packets like nobody's
> business and is showing the same results that I describe above. Perhaps
> there is something about ping that doesn't allow you to ping from an
> interface to an interface?? I always thought you could do that...
>
> >
> >
> >>From the router, can you sucessfully ping its own interefaces on each
> > network? (ie eth0 and eth1)
> >
>
> yes AND no!
>
> -matthew
>
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
> https://listman.redhat.com/mailman/listinfo/redhat-list
>



-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to