> Sounds likely! Is it possible to copy the installation files from the CD
to
> the external hard drive and do the installation from there?

Apparently you can - but I've never done this. I'm sure somebody else will
fill you in further on that.

As Mike said - it sounds like the devices 'move' as things are attached or
not, and where they are attached at the time.

This is pretty annoying.

Linux has two things to determine where everything is.

Grub - the boot loader can say where the boot partition is. Once loaded, all
other drives are mounted as per the /etc/fstab.

They're pretty hard-wired. For example, they may be referred to as
/dev/hd[xy] devices where x can be a, b, c, d depending on which hard drive
we are referring to. The y can then be 1, 2, 3, 4 etc depending upon which
partition. If your attaching things moves these devices the kernel will be
trying to boot from the wrong drive and/or partition and you'll get what
you've already seen.

I'm not sure of a way around this except if there is a 'static' hard drive
in the system (one that never changes), then maybe you could put your boot
partition on that.

I'm sure someone mentioned you can actually boot depending on volume label
instead of the /dev/hd[xy] convention as well, although I never heard
anything about it anymore and I certainly know no more about it than that.

Anyway, I hope this gives a little insight, and certainly - if you find a
way around it let us all know. You won't be the first or last person who has
this problem and you may be helping someone else.

Regards,
Edward.




-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to