> Mike <[EMAIL PROTECTED]> wrote: > I am looking into building a repeater out > of 2 kenwood mobiles. Do both mobiles have > to be the same?
No > Can they be different models? Yes > How would I connect them to a controller > without a data cable coming out the back > of the radio? Kenwood makes accessory external cable kits for some of their radios which provide all the functions via a flying cable lead into a 15 pin molex (with matching connector and wire pins). I stock some of these cable kits and will provide the pins outs for the units I have. Email me off the list if you want more information. > Is it possible to use the mic jacks? It can be quasi done through the mic jack, but it's not the best way. > Which controller should I use for a very > very small budget? I would like a CW id > on the repeater. A possible phone patch > later, but not right now. B & D Enterprises sells a pretty neat controller, I often see Boyd selling them on Ebay for $69 > I am totally new to repeater so please > make it simple. I am hoping for something > like a plug in and its on the air type > thing, with exception for programming > the controller and radios. Few things are plug and play when you're on a small budget. > Thank you in advance for you help, Mike good luck Mike cheers, skipp025 at yahoo.com Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/