Our repeater is an MSR2000 UHF model, Model # C74GBS3106BT. It was originally at 460 MHz, and we tuned it down to 444.550 / 449.550. Our problem is - we are only getting about .6 µv to .7 µv sensitivity in the receiver, and this is when feeding signal DIRECTLY into the receiver (no duplexer). If I remember, the manual says that nominal sensitivity should be about .2 µv... The tuning coils are bottomed out, so we have no more tuning available with which to improve the receiver..... So, my question is: Does anyone know if there is any different receive boards available, other than the TRNE6262A ? If so, can you advise what the part number would be? I would think that Motorola MUST have made UHF repeaters lower than 450 MHZ, but I can't seem to locate any part numbers for receiver boards for any of those machines. (We called Motorola parts, and this is the part number for the receiver board they say belongs on our machine - of course, it's for 450-470 MHz range, which is what is specified by our model number. They were no help with whether there is any other receiver board available for any other frequency spread. Plus, the TRNE6262A is no longer available, anyway.) Also, my manual is not complete... We have all the sections for the transmitter, but the receiver stuff is all VHF. :-( Otherwise, I guess a modification is in order, and I'm not sure where to look for that. Can anyone point me in the right direction?? I'd be much obliged! Thanks! Mark - N9WYS
Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/