At 08:22 PM 5/1/2004 -0400, you wrote: >Ken, > >Having refurbished and tuned a number of those cavities, I >would suspect it may not be getting a good low resistance >contact between the end of the coupling loop and the inside >of the cavity.
<---Thanks Paul but I have already looked at the interior. Very clean with little signs of oxidation. The area around the end of the coupling loop is clean and looks good. Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html Be sure to see our products at this year's Dayton Hamvention! Repeater Builders spaces 707 through 710 AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/