Ken, On the High Pass/Low Reject side I had to move the coupling loops of both cans to the 2nd position (outer most hole) on a 445.580- pair in order to get maximum reject of 440.580. It's worth a try and see how your notch looks there. Rather suspicious though that the one can is ok......hmmmm ~ Mike N6KYD ~
----- Original Message ----- From: "Ken Arck" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Saturday, May 01, 2004 7:48 PM Subject: Re: [Repeater-Builder] T1504 cavity > At 07:09 PM 5/1/2004 -0700, you wrote: > >Do you already have the loop moved to the 2nd hole which allows for more > >adjustment. Just thought I would ask. > > <---Haven't tried that yet but the other lowpass cavity (the one that > appears to be ok) has the coupling loop in the same hole. > > Ken > -------------------------------------------------------------------------- ---- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > Be sure to see our products at this year's Dayton Hamvention! > Repeater Builders spaces 707 through 710 > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
