At 08:50 PM 5/1/2004 -0400, you wrote: >I would guess you verified the 'rough' adjustment to be in the same >position as the other three?
<---It's nowhere near where the others are. Same coupling loops, oriented the same way as the other lowpass/hi reject too. The internals looks fine and clean. Pass loss is the same (but I haven't run bandpass measurements yet). Even by itself, this one cavity behaves this way.. Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html Be sure to see our products at this year's Dayton Hamvention! Repeater Builders spaces 707 through 710 AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/