Or a Motrac, Motran, Mocom-70, etc. The 160-170mhz radios are essentially doorstops, or parts sources. The front end helical assembly works fine for this.
Mike At 10:06 PM 6/1/04 -0400, you wrote: >pull a set of helicals out of a Micor mobile. a high split will do fine. > >If you need to locate some contact me off the list. > >Kevin > >-----Original Message----- >From: Eric Lemmon [mailto:[EMAIL PROTECTED] >Sent: Tuesday, June 01, 2004 8:14 PM >To: Repeater-Builder@yahoogroups.com >Subject: Re: [Repeater-Builder] Desense > > >Don, > >It's a coincidence that I am adding a WX-1000 weather receiver/alarm >system to one of my 2m repeaters, and I found that the 2m signal was >clobbering the WX unit. Even moving the WX receive antenna away from >and behind (it's directional) the 2m antenna didn't help. The solution >was to connect a small Sinclair preselector in front of the WX >receiver. These little gems are about five inches square, and have four >helical resonators. I tuned it to the WX frequency, and eliminated the >2m interference. Preselectors are not cheap, but DCI will make you a >nifty filter, similar to the ones for 2m, that passes just the NWS >frequencies. It'll cost about $100, since it's a custom model. > >73, Eric Lemmon WB6FLY > >Don wrote: > > > > I have a lot of Non Ham friends who use the Mur Freq 151.820 taking their > > HT To Little League Games Camping Etc , And I was going to set up a Legal >2 > > Watt Narrow/band FCC type accepted Radio , Whew had to get that out of >the > > way first. > > > > Then tie that into My 440 repeater that I rebroadcast the NWS and Amber > > Alert Warnings . well the Testing I have done The Two Watts . De sensed > > the Weather receiver so bad It distorts the signal which is a strong one > > on a homemade outside ant at 20 Ft. 151.82 is also a homemade ant at 30 > > Ft. opposite side of QTH. > > > > Can I use some kind of Filter on the 162.425 Receiver to knock this down >. > > In case No one knows about the Lic Free Murs Band > > http://www.provide.net/~prsg/murs_faq.htm We use it a lot in My area to > > bring Hams and Non Hams and people Interested in Communications together > > lots of radios in wife cars Etc. > > > > Thanks Don KA9QJG > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/