Give this a try,
Turn off the rev. burst.
73 Russ,
----- Original Message -----
From: "ian wells" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Friday, July 23, 2004 6:17 PM
Subject: [Repeater-Builder] tait t2010
>
> hi guys
> i am wondering if there is a way to setup or to program a t2010 to
transmit
> a tail without the ctcss tail on the end of a transmission (ie to be used
as
> the transmitter in a a repeater so while the receiver receives a signal
it
> activates the t2010 transmitter with a ctcss ,and when the receive signal
> ceases the transmitter continues with a 1-2 second tail without the
> ctcss ).At the moment i have 2 t2010 connected direct through so while a
> signal is received the transmitter transmitts with the ctcss
> Thank you
> Ian Wells
> Kerinvale Comaudio
> mail service 1017,
> Biloela,4715.
> www.kerinvalecomaudio.com.au
> 1-email- [EMAIL PROTECTED]
> 2-email- [EMAIL PROTECTED]
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
