the rev burst wasn't enabled but i tried it enabled and nothing happened.thanks for the sugestion Thank you Ian Wells Kerinvale Comaudio mail service 1017, Biloela,4715. www.kerinvalecomaudio.com.au 1-email- [EMAIL PROTECTED] 2-email- [EMAIL PROTECTED] ----- Original Message ----- From: "russ" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Saturday, July 24, 2004 10:47 AM Subject: Re: [Repeater-Builder] tait t2010
> Give this a try, > Turn off the rev. burst. > 73 Russ, > ----- Original Message ----- > From: "ian wells" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Friday, July 23, 2004 6:17 PM > Subject: [Repeater-Builder] tait t2010 > > > > > > hi guys > > i am wondering if there is a way to setup or to program a t2010 to > transmit > > a tail without the ctcss tail on the end of a transmission (ie to be used > as > > the transmitter in a a repeater so while the receiver receives a signal > it > > activates the t2010 transmitter with a ctcss ,and when the receive signal > > ceases the transmitter continues with a 1-2 second tail without the > > ctcss ).At the moment i have 2 t2010 connected direct through so while a > > signal is received the transmitter transmitts with the ctcss > > Thank you > > Ian Wells > > Kerinvale Comaudio > > mail service 1017, > > Biloela,4715. > > www.kerinvalecomaudio.com.au > > 1-email- [EMAIL PROTECTED] > > 2-email- [EMAIL PROTECTED] > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/