You'd probably have to code a new eprom. I don't know what the current prices are but the last time I bought some from Kenwood (1994), they were around 1900. That was without an amp or controller, the exciter puts out 100 to 700 milliwatts.
Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Member: ARRL, RSGB, RCA, WERA and ORC -----Original Message----- From: Richard W. Solomon [mailto:[EMAIL PROTECTED] Sent: Thursday, September 16, 2004 5:15 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Kenwood Repeater It says to ..."dial in the FCC Channel Number"... Not very useful for Ham use (39 MHz split). Unless they will provide a new EPROM for 25 MHz split. Any idea on pricing ?? 73, Dick, W1KSZ -----Original Message----- From: W9DHI [mailto:[EMAIL PROTECTED] Sent: Thursday, September 16, 2004 9:36 AM To: Repeater-Builder@yahoogroups.com Subject: FW: [Repeater-Builder] Kenwood Repeater http://www.maceinconline.com/kenwood/repeaters/900_repeater_transceiver.html Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Member: ARRL, RSGB, RCA, WERA and ORC -----Original Message----- From: Mr. Edgar McKinney [mailto:[EMAIL PROTECTED] Sent: Thursday, September 16, 2004 6:42 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Kenwood Repeater I went to the Kenwood site to find what repeaters they have, and all I did find were 145mcs and 444 mcs repeaters. No mention about 902s. What are the model numbers are you folks talkin about? Ed - kb8qru Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
