okay the audio id from the controller sounds great through the output of my
repeater however the audio from the receiver is to low to be heard with out
turning the audio on the listening radio up full blast and being in a quiet
room
my repeater is a micor compu station I have used the following site to make
the connections between the repeater and the controller
http://www.ccdx.org/zedyx/mods/micorbas.htm
so audio coming from the micor is just low is there something I missed in
making the micor into a repeater?
something I need to do to the micor for higher audio?
I am using a arcom rc-210 controller
I removed the jp10 jumper on the controller and that is the only way any
received audio is heard
the audio in the repeater on the test set sounds great. anyone got any
suggestions
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
