At 11:42 PM 4/13/2005 -0000, you wrote: > > >I have set the deviation level of the repeater to 4.5 Khz, which for >most users is excellent, however I have a few users whom no matter >what radio they use, alwys clips well over 6 Khz wide. Is there a way >to limit this? When these users come in, you have to turn down the >volume, but then it's difficult to hear the normal voice users of the >system. Any thoughts. Or am I just plagued with loud voice users.
<--First of all, are you bypassing the deviation limiters in the repeater's xmtr ? If so, either it's not working correctly or you haven't set up your audio levels correctly. What kind of radio is your repeater? Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We now offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/