I just bought 2 maxtracs with the intent of making a repeater.
Model#D33MJA77A3CK. The radios work ok but they are 146-174Split. The
problem I am having is that I have no control of the RF output. I dinked
around inside of the RSS and I can set the power within the radios
bandsplit but once I do the shift button trick and take it outside the
spilt, it just goes into overdrive.. This is supposed to be a 25watt
radio but outside the limit it ramps up to 35w.
Is there a trick to reign this thing in?
Or am I just going to have to look for a different radio that goes where
I want it to?
--
Jay Urish W5GM
DCARA President ARRL Life Member
TXFCA President ERS Vice-Prez
Denton County ARRL VEC
N5ERS VP/Trustee
Monitoring 1292.30Ghz PL-100.0 441.375 PL-88.5 and 444.850 PL-88.5
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
