Re: [Repeater-Builder] Quick CW ID'er

[Vincent Caruso]

there is an ID-8 listed on e-bay item # 9701026398 Eric Lemmon wrote: > Bill, > > Cheap is not always best.  The easy solution is a Communications Specialists > ID-8, which costs about $70.  Go here: > > http://www.com-spec.com/id8.htm > > Since most mobile radios have DC power at the mike connector, you can simply > crimp the ID-8 flying leads into the appropriate modular plug.  You may need > to install a jumper inside the radio to bring the activity signal to the > ID-er, so that it won't perpetually key itself.  Some of the very > inexpensive ID-ers have little or no RF immunity, and don't operate properly > when close to the transmitter.  The ID-8 is a versatile and reliable device. > I have several in service. > > 73, Eric Lemmon WB6FLY > > > -----Original Message----- > From: Repeater-Builder@yahoogroups.com > [mailto:Repeater-Builder@yahoogroups.com] On Behalf Of wa9ba > Sent: Sunday, March 19, 2006 4:10 AM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Quick CW ID'er > > Has anyone came up with a cheap easy CW ID'er for a GR 500 repeater? > I was hoping I could find something that would, say, plug into the mic > socket that would ID every 10 minutes. > Bill WA9BA > > > > > > >   > Yahoo! Groups Links > > <*> To visit your group on the web, go to: >     http://groups.yahoo.com/group/Repeater-Builder/ > > <*> To unsubscribe from this group, send an email to: >     [EMAIL PROTECTED] > > <*> Your use of Yahoo! Groups is subject to: >     http://docs.yahoo.com/info/terms/ >   > > > > > YAHOO! GROUPS LINKS  Visit your group "Repeater-Builder" on the web.    To unsubscribe from this group, send an email to:  [EMAIL PROTECTED]    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.