"The page cannot be found." Neil - WA6KLA
---- Original Message ---- From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Quick CW ID'er Date: Sun, 19 Mar 2006 13:57:20 -0800 >The ID-8 was used in this project - and there are some >photos that might help you to decide if it's the unit for you. > ><http://www.repeater-builder.com/micor/micor-shelf-id8.html> > >Since you will be injecting it into the mic jack you won't >need the op-amp-buffer that the project in the photos >needed. > >Mike WA6ILQ > >At 04:45 AM 03/19/06, you wrote: >>Communications Specialists (the folks who make tiny PL >>encoders and decoders) also has a CW ID board that >>might do the trick. I guess it depends on your idea of >>"cheap", but I think it's around $50 and would do the >>trick for commercial as well as amateur stations. >> >>Bob M. >>====== >>--- wa9ba <[EMAIL PROTECTED]> wrote: >> >> > Has anyone came up with a cheap easy CW ID'er for a >> > GR 500 repeater? >> > I was hoping I could find something that would say >> > plug into the mic >> > socket that would ID every 10 minutes. >> > Bill WA9BA >> > >> > >> > >> > >> > >> > >> > >> > >> > Yahoo! Groups Links >> > >> > >> > [EMAIL PROTECTED] >> > >> > >> > >> > >> > >> >> >>__________________________________________________ >>Do You Yahoo!? >>Tired of spam? Yahoo! Mail has the best spam protection around >>http://mail.yahoo.com >> >> >> >> >> >>Yahoo! Groups Links >> >> >> >> > > > > > > > >Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
