Shortening Phono plug center pin....real easy.
Find appropriate size drill bit that fits into center pin of
phono plug.
Mount drill bit horizontally in your bench vise.
Adjust phono plug on drill bit until your happy with center pin
length.
Use a jewelers saw to cut unwanted center pin length off.
Do not cut drill bit. Only use it as a length guide and support.
Smooth and bevel new edge with a real fine file. Presto !
Do a bunch of them in one sitting then put them in a special
bag labeled phono plug shorty's. Then do as I do, misplace
the bag, never to be found again.
Gary K2UQ
YAHOO! GROUPS LINKS
|
- Re: [Repeater-Builder] Need source for RF RCA connectors albemarle7
- Re: [Repeater-Builder] Need source for RF RCA connect... John J. Riddell
- RE: [Repeater-Builder] Need source for RF RCA connect... Eric Lemmon
- Re: [Repeater-Builder] Need source for RF RCA connect... KE4ADV
- Re: [Repeater-Builder] Need source for RF RCA connect... KE4ADV
- RE: [Repeater-Builder] Need source for RF RCA connect... Jeff DePolo