It is definitly the 35amp power supply it has the large fuse holder on the back and the model number shown in my post looks up as a high current power supply capable of the 110watt station.
I'm going to check the ferro cap and report back! -----Original message----- From: "Nate Duehr" [EMAIL PROTECTED] Date: Mon, 05 Feb 2007 22:14:09 -0800 To: Repeater-Builder@yahoogroups.com Subject: [Spam] Re: [Repeater-Builder] Mastr II Station Power Supply Problem? > On 2/5/07, Bill Hudson <[EMAIL PROTECTED]> wrote: > > > > If you have the high current model, it has a BUSS NON-35 AMP one-time > > FUSE (Class K5), and is 3 inches long. > > > > The 15 Amp fuse is a NON-15 (obviously), and is considerably smaller in > > size, and is 2 inches in length. > > > > It will be obvious when you look at the fuse holder / fuse. I could look > > up some model numbers, but this information will tell you if you have the > > smaller power supply in a BIG BOY application. > > > > Visually, this is the black plastic "soap dish" fuse holder versus the > larger fuse holder directly bolted on the back with a metal shield over it. > > I could probably take photos of both types given enough time, if someone > badly wanted them. I just racked a "soap dish" into a very difficult rack > to get things in and out of, though -- so it'd be no fun to pull it back out > and shoot a digital pic... (sigh - bad timing, as always...). > > Nate WY0X > >
